Creating a proximity switch in No Man’s Sky (NMS) can be achieved using the game’s advanced Circuits Module and GekNip. Augmenting existing bits of technology to make a proximity switch can open up some powerful possibilities in the game as a whole. In this guide, we will discuss the basics of how to create a proximity switch in NMS.
What Is a Proximity Switch in NMS?
A Proximity Switch in Network Management System (NMS) is a type of network switch that is used to detect the presence of a device within a specified area. This switch is typically used in industrial automation, robotics, and other applications where monitoring and control of devices is needed. The Proximity Switch is able to detect and control devices in a specific area without requiring physical contact.
Benefits of a Proximity Switch in NMS
A Proximity Switch in NMS offers several advantages over traditional network switches, including:
- Increased Safety: Proximity switches are designed to detect any device within a certain range and automatically shut off power when the device is no longer present. This prevents accidents and injuries that can be caused by leaving devices on or unattended.
- Reduced Cost: Proximity switches can reduce costs associated with manual switch replacement, as they are able to detect when a device needs to be switched off or on without any human intervention.
- Improved Efficiency: Proximity switches can be programmed to detect and control devices in a specific area in a timely manner, thus improving the efficiency of the network.
- Flexibility: Proximity switches can be programmed to detect and control devices in a variety of ways, enabling users to customize their network according to their needs.
How to Create a Proximity Switch in NMS
Creating a Proximity Switch in NMS is relatively easy and can be done in a few simple steps.
Step 1: Choose a Proximity Switch
The first step in creating a Proximity Switch in NMS is to choose the type of switch that will be used. There are several types of Proximity Switches available, so it is important to choose one that is suitable for the application.
Step 2: Configure the Proximity Switch
Once the switch has been chosen, it must be configured in order to operate correctly. This includes setting the range, detecting devices, and programming the switch to detect and control devices in a specific area.
Step 3: Connect the Proximity Switch
The Proximity Switch must then be connected to the NMS. This is typically done through an Ethernet cable, but some switches may also be connected wirelessly.
Step 4: Test the Proximity Switch
Once the switch has been connected, it must be tested to ensure that it is working properly. This can be done by testing the range and detecting devices in the area.
Creating a Proximity Switch in NMS is relatively easy and can be done in a few simple steps. The Proximity Switch offers several advantages over traditional network switches, including increased safety, reduced cost, improved efficiency, and flexibility. It is important to choose the right switch for the application and configure it correctly in order for it to operate properly.