How to clean the USB port on your computer

Clean the computer’s USB port can become a problem because dust and dirt tend to lodge in the deepest area of ​​the slot, making it difficult to remove debris. For this reason, it is important to find the ideal method to clean the port without compromising the integrity of the PC, as occurs when cleaning mobile ports.

So, to avoid damaging the USB port of your computer, below you will find the safest and most effective methods to clean the port. There are several procedures that you can apply to make your computer look like new without running any risk.

Step by step to clean the USB port of your PC

There are several methods that will allow you to safely maintain the USB port on your computer. They are the following:

– Use a toothbrush: It is the perfect utensil because the bristles of the toothbrush are soft and malleable, it will not offer any resistance, which will make it possible to clean without compromising the groove.

Simply insert the bristles of the brush into the port to remove all the dirt. It is effective in removing all the dust that solidifies at the bottom of the cavity without having to apply much force.

– Compressed air: It is effective in removing accumulated dust without having to get too close to the nozzle to avoid any type of damage. Furthermore, to ensure proper cleaning, it is recommended that the nozzle be shaped like a straw so that all the air can focus on small areas.

Also, when expelling the air, only use small bursts, do not release air for a long time because this could damage the pins of the USB port. In this way, the pressurized air will remove the dust that is stored in the slot quickly and safely.

– Isopropyl alcohol: One of the most common methods, it will be enough to moisten the bristles of a toothbrush or a toothpick to clean the internal USB area of ​​your computer. Note that you should not use distilled or normal water because it could damage the electronic components of the port.

– Cleaning rubber: This is known as “cyber clean”, it is a rubber that can be molded to any type of shape to trap dust that is retained in hard-to-reach spaces, such as the USB port of the PC. You will only have to insert the rubber into the groove so that it captures all the dirt that is cemented.

So, these are the best methods that you can use to easily clean the USB port of your computer. However, never use metal gadgets to clean the slot, as this could damage the USB pins. Also, when cleaning, turn off the PC so that the ports are not active while you carry out the work.

Click to rate this entry!
(Votes: 1 Average: 3)

Leave a Comment