Wired connection to the Internet has multiple advantages. For example, you don’t need to worry about reducing Wi-Fi interference or where to place the router to improve the signal. Still, cables can be faulty, and knowing how to fix Ethernet connection faults is essential.
An Ethernet connection can fail due to a bad cable, outdated network drivers and even router problems.
In most cases, fixing Ethernet connection failures does not require extremely in-depth knowledge. Below, we will explain what an Ethernet connection is and some of the most common causes why your wired connection might be failing and, of course, how to correct the problem.
What is an Ethernet connection
An Ethernet connection is a way to connect devices to a local area network (LAN). It uses a copper cable to transmit data between devices. The Ethernet cable has eight wires, which are used to transmit data in two different directions.
To connect two Ethernet devices, you will need to use an Ethernet cable and an Ethernet connector. The Ethernet connector has eight pins, which correspond to the eight wires of the Ethernet cable. To connect the Ethernet cable, you must insert the pins of the Ethernet connector into the holes of the Ethernet port of the device.
Once the Ethernet cable is connected, the devices will be able to communicate with each other. The speed of the Ethernet connection will depend on the type of Ethernet cable you use. The most common Ethernet cables are Cat5e Ethernet cable and Cat6 Ethernet cable. Cat5e Ethernet cable can reach speeds up to 100 Mbps, while Cat6 Ethernet cable can reach speeds up to 1 Gbps.
Ethernet connections are a reliable and fast way to connect devices to a LAN. They are the preferred choice for most home and office networks.
Here’s how you can troubleshoot your Ethernet connection
– Restart the modem and the router: is a failure very similar to the one that often occurs in wireless connections. Both the router and the modem may be damaged due to a lack of cache cleaning. In this case, the solution is simple, unplug both devices, wait about a minute and plug them in again.
– Cable coupling: As you may know, Ethernet cables have a system that allows you to hook the end of the cable when inserting it into the device. Sometimes the connector may not be properly secured, which will prevent you from accessing the Internet.
– Check if you have the Ethernet connection enabled: Normally, the Ethernet connection on the computer is usually enabled by default. However, in some cases it is not, and may even be accidentally disabled.
To check if Ethernet is enabled, just right-click on the Windows button and click the “Device Manager” option. Now, open “Network adapters”, check if the Ethernet option is disabled. If so, click on “Enable device”.
– Reset the network settings: can be a drastic method, so it is recommended to implement it in case the failure persists. Basically, you will bring the network settings back to their default values. Simply enter the settings of your Windows computer, choose “Network and Internet”, then “Advanced Settings” and press “Reset Network”.
– Update your network card drivers: obsolete or corrupt drivers can affect your Ethernet connection, the solution is to update them. To do this, you must right-click on the Windows icon, then “Device Manager”, and then “Network Adapters”. and then “Network adapters”. Locate the Ethernet option and click. Finally, choose “Update driver” and follow the system instructions.
