What to do if the WiFi network constantly connects and disconnects

If your Wi-Fi network connects and disconnects, it is very likely that the signal is very weak. This happens especially when you are too far from the router, and the signal strength is not enough to guarantee a stable connection.

Although using Wi-Fi repeaters can be a good solution, if you do not place them strategically, they could give you a poor signal or even cause interference.

Ideally, you should know where to place your home router and make sure that the repeater, if you decide to use it, is about 10 or 15 meters away from both the router and the devices you use.

However, you have to know that there are other factors that could also be affecting the stability of your connection. In this article, you will find a list of causes and recommendations that could be very useful to avoid this type of common failure.

Reasons why the Wi-Fi network is not stable

If you are having problems with the stability of your Wi-Fi network, you have to check these reasons that could affect your connection:

-The firmware is outdated. You should update your router’s firmware if you are experiencing stability issues. This way, you will have better performance, more security, and you will solve other problems that you had not detected.

The most modern routers usually update automatically, but in others it must be done manually according to the manufacturer’s specifications

-The Wi-Fi network card is outdated. The most advisable thing is to update the Wi-Fi card drivers. You can do this with Windows Update or by accessing your card manufacturer’s website manually. This way, you will avoid problems with the signal or failed reconnection attempts.

It may also be that your Wi-Fi network card is outdated and therefore does not have the ability to correctly manage the signal.

-You are using the wrong frequency band. It is best to use the 2.4 GHz band if you have remote connections. The 5 GHz is the most suitable if you make connections very close to your router, since they provide greater speed.

You just have to access the router settings through its IP to configure the frequency band. If the 5 GHz doesn’t work well, change it to 2.4 GHz or try moving closer to the router to see if the connection improves.

-The network is congested. This happens when you have too many devices connected to your Wi-Fi network: smartphones, computers, tablets, smart TVs, consoles…

Disconnect all those that you are not using at that moment or even limit the number of connections that can be active simultaneously from your router administrator.

-There is malware on the system. Malicious programs consume bandwidth and this makes your connection unstable. You should have a reliable antivirus, but if you think you are infected by malware, back up your data and format the system.

-You have a power setting. Power saving features can suspend the Wi-Fi connection to reduce consumption.

Check if your computer or mobile phone has any of these settings. If so, put everything back to normal, as this could be the cause of these connection failures.

-You are using a VPN. In general, VPNs tend to overload the Wi-Fi connection. Try disabling it for a moment and then try connecting to the network again to see if it improves.

Click to rate this entry!
(Votes: 0 Average: 0)
Share!

Leave a Comment